Agilent 1100 HPLC Degasser Upgrade-Kit
Upgrade-Kit for Agilent 1100 HPLC degasser with Systec AF® Technology
Is your Agilent 1100 HPLC degasser out of date? Intending to invest in a new one? DON´T! Our Agilent 1100 HPLC Upgrade Kit will bring your old device to a new level, and can still be used for many suitable routine analyzes.
The Biotech Systec AF® upgrade kit G1322 is a drop in assembly that can be installed in less than 20 minutes, requires only the use of a #1 Phillips Screwdriver, and provides the following benefits over the original configuration. These kits retains the original control board and vacuum sensor, so all communication functions with the HPLC stack and computer software are maintained.
The Biotech Systec AF® upgrade kit for G1379 HPLC degasser can be bought both as a separate 2-channel degassing chamber kit or as a complete kit with vacuum pump and PC-board. The HPLC degasser chamber kit works for both models G1379A and G1379B, while the kits with vacuum pump and PC-board included works with G1379A only.
Agilent 1100 G1322 Upgrade Kit
Agilent 1100 G1379 Upgrade Kit
Lower Internal volume
Go from 12ml internal degassing membrane volume down to 480µl with our Systec AF membranes, which results in easier priming, lower flow restriction, reduced solvent changeover quantity requirements, and faster equilibration times (less than 5 minutes vs. 30 minutes).
ZHCR® vacuum control
The Zero Hysterises Constant Run (ZHCR®) vacuum control makes sure the vacuum is maintained at a constant mm/Hg level (other vacuum levels available on request) which eliminates detector baseline noise due to varying vacuum levels in the chamber that occurs the with original 1100 On/Off vacuum pump control.
Go to Shop
Working with GPC or Normal Phase Chromatography? Use our special GPC version of the above HPLC degasser upgrade kits. The GPC version use the same stented degassing chambers as we use in DEGASi GPC, enabling you to run aggressive GPC solvents and Normal Phase solvents as hexane.